Description
MA Lighting grandMA3 onPC Command Wing is a compact hardware control surface for grandMA3 onPC workflows. This United AV Pro listing is for a used Command Wing described as being in excellent condition, with one unit listed at the current price of USD $6,121.50. The listing identifies the control wing itself; it does not confirm that a computer, monitor, network hardware, DMX cabling, show file, flight case, or other accessories are included. Confirm the exact unit and package contents before ordering.
The technical information below was checked against MA Lighting’s official grandMA3 onPC Command Wing reference. Manufacturer specifications describe the product platform and the standard new-product package; they do not certify the condition, service history, software state, or included accessories of this used unit. Ask United AV Pro to confirm the serial information, current availability, included equipment, and delivery quotation for the specific unit.
What this Command Wing listing represents
- Used MA Lighting grandMA3 onPC Command Wing.
- United AV Pro listing condition: excellent.
- Current listed price: USD $6,121.50 for one control wing.
- Current listed quantity: 1 unit.
- 4,096-parameter control capacity stated by the manufacturer.
- 29 RGB-backlit rotary encoders and five dual encoders.
- Ten motorized 60 mm faders and two motorized 100 mm A/B faders.
- 40 playbacks and 16 assignable X-keys.
- Three DMX ports, USB, MIDI, timecode, and GPI connections.
The store quantity is a current listing fact and can change. If the control wing is being purchased for a production inventory, ask for current photographs and a test demonstration of the exact unit. Confirm the software environment, show-control requirements, and any included computer or case before committing the console to a project.
Control surface for grandMA3 onPC
The Command Wing provides physical controls for a grandMA3 onPC system. Its faders, encoders, playbacks, keys, level wheel, and connection panel are intended to give an operator hands-on access to a lighting-control workflow while the software environment runs on a compatible computer. The hardware should be considered one part of a control system, not a complete lighting console package by itself.
Before ordering, confirm the computer, operating system, software version, display arrangement, network design, DMX output plan, and backup strategy required for the show. The listing does not state that a computer, monitor, network switch, DMX cable, UPS, desk, or flight case is included. Do not assume that a photographed setup represents the contents of the sale.
The 4,096-parameter figure is a manufacturer reference for the Command Wing platform. It does not describe the number of fixtures, universes, cues, or network nodes that a specific show can use without considering software configuration, licensing, computer performance, network design, and the lighting system. Confirm the complete grandMA3 onPC setup for the intended production.
Encoders, faders, and playbacks
The Command Wing includes 29 RGB-backlit rotary encoders and five dual encoders. These controls support parameter adjustment and provide visual feedback for an operator. On a used unit, inspect the rotation, push action where applicable, backlighting, spacing, and response of every encoder. A single intermittent or stiff control can affect programming speed and operator confidence during a show.
Ten motorized faders are provided in a 60 mm format, together with two motorized A/B faders at 100 mm. Motorized faders should be checked through a complete travel range for smooth movement, accurate position feedback, noise, and unexpected jumps. Inspect the fader caps and faceplate for damage, liquid residue, loose parts, or signs of impact. Confirm that the motors park correctly during startup and respond consistently when a show or control state changes.
The wing provides 40 playbacks and 16 assignable X-keys. Test each playback button and X-key for reliable actuation and consistent backlighting. Ask whether the used unit has any known key, fader, encoder, or display limitations. If a show relies on a specific layout, confirm the physical control mapping and the condition of the controls before transfer.
A level wheel is also included in the physical control set. Check the wheel for smooth operation, correct response, and accidental movement. During a demonstration, confirm that the operator can navigate the intended control workflow without unexpected input or lag from the connected computer.
DMX, MIDI, timecode, and GPI
The manufacturer reference identifies three DMX ports on the Command Wing. These ports are central to connecting the control system to compatible lighting equipment, but the listing does not state that DMX leads, opto-splitters, fixtures, or network infrastructure are included. Confirm the connector condition, port labeling, signal test, and output plan before use.
MIDI, timecode, and GPI connections support integration with other show-control equipment when the complete system is configured for that purpose. Confirm the exact connection type, pinout, source, destination, and required cable for the intended project. A port being present does not mean that a controller, timecode source, interface, or cable is included or that every control method is enabled in the show file.
Build a clear patch and signal-flow document. Identify the Command Wing, computer, DMX outputs, network path, external control connections, power distribution, and backup path. Label each cable and confirm that the final show file matches the physical output arrangement. Test the system before load-in and retain a known-good backup of the software and show data.
USB and system connectivity
The Command Wing includes USB connectivity for the control workflow. Check the USB ports on the used unit with the intended computer and cable, and inspect for looseness, damage, bent contacts, or intermittent connection. Confirm whether the quotation includes the manufacturer’s USB cable or another cable; the standard new-product package is not evidence that the used listing includes it.
Confirm the computer connection, software installation, device recognition, network configuration, and output test with the operator who will use the system. If the Command Wing is being integrated into an existing grandMA3 onPC environment, check software versions and show-file compatibility before the event. Do not assume that a used unit has been reset, updated, or configured for the buyer’s workflow.
Power and physical dimensions
MA Lighting lists the Command Wing for 100–240 V at 50/60 Hz, with a maximum consumption of 50 VA. The exact supplied power cable and plug should be confirmed for the destination. Check the unit’s power inlet, cable, switch or control, and startup behavior. Use suitable power distribution and allow a qualified technician to verify the venue supply before connecting the wing.
The Command Wing measures 620 × 427 × 102 mm and weighs 10 kg. Allow additional space for the computer, monitor, cables, DMX connectors, network connections, operator access, and ventilation. A control surface that fits on a table may still need a stable, protected, and appropriately sized workstation for live use.
Ask whether a dust cover, case, magnetic plate, or other transport protection is included. MA Lighting lists a dust cover, USB cable, magnetic plate, manual, and power cable with the standard new-product package, but this used United AV Pro listing does not independently confirm those items. Treat each accessory as included only when the seller states it in the quotation.
Operator workflow and show preparation
Use the Command Wing as part of a documented show-control process. Before programming, confirm the software version, parameter capacity, fixture library, output addressing, network settings, DMX port assignment, MIDI or timecode source, and backup method. Set a clear naming convention for fixtures, groups, presets, cues, playbacks, and external controls so another operator can understand the show.
During rehearsal, verify every motorized fader, encoder, playback, X-key, level wheel, DMX port, USB connection, and external-control input used by the show. Check that control changes are reflected in the software and that output changes reach the intended fixtures. Test failover or manual fallback according to the production plan. Keep audience and performers clear of moving lights and do not make high-risk changes without a safe review.
For touring work, protect the faders, encoder caps, buttons, and connectors during transit. Use a suitable case or padded transport solution if one is not supplied. Allow the control wing to acclimatize in a safe environment after transport when condensation is possible, and inspect for damage before powering it. Record the pre-show state and carry a backup computer or control path when the production requires continuity.
Used-equipment inspection
United AV Pro describes the Command Wing as excellent, but the condition should be confirmed for the exact unit. Request photographs of the top panel, faders, encoders, playback keys, X-keys, connectors, underside, labels, and power inlet. Ask for the serial information, recent power-on test, software recognition test, connector test, service history, and any known limitations.
Check the chassis for dents, bent panels, loose screws, liquid marks, corrosion, or evidence of impact. Test fader travel, encoder rotation and push action, key actuation, backlighting, wheel response, USB connection, DMX ports, MIDI, timecode, GPI, and power. Verify that the motors move smoothly and that no control triggers when untouched. If any control is inconsistent, request a repair or condition statement before ordering.
Confirm the software and accessories included. A hardware control wing without the intended computer or cabling may require additional project time and cost. Ask the seller to state whether the unit is supplied alone or with a case, cover, cable set, magnetic plate, manual, power cable, computer, monitor, or other equipment.
Price, stock, and delivery
The current United AV Pro listing shows USD $6,121.50 for one Command Wing and one unit in stock. These commercial facts can change. Confirm the price, exact unit, condition, serial information, included equipment, destination, and delivery arrangement in writing before ordering.
Provide the destination country, city, and postal code for a delivery quotation. Confirm packing, freight, insurance, customs documentation, lift access, and the handling needed to protect the faders and encoder panel. Review the published United AV Pro shipping and returns policy, and ask the store to confirm the warranty or return terms that apply to this used control wing and its specific condition.
Verified manufacturer reference
The technical points in this description were checked against MA Lighting’s official grandMA3 onPC Command Wing reference. Verified facts include 4,096 parameters, 29 RGB-backlit rotary encoders, five dual encoders, ten motorized 60 mm faders, 40 playbacks, 16 assignable X-keys, two motorized 100 mm A/B faders, a level wheel, USB, three DMX ports, MIDI, timecode, GPI, 100–240 V at 50/60 Hz, maximum 50 VA, 620 × 427 × 102 mm dimensions, and 10 kg weight. The standard new-product package lists a dust cover, USB cable, magnetic plate, manual, and power cable; confirm which, if any, are included with this used unit. See the official MA Lighting grandMA3 onPC Command Wing page for current product information.
Request a quotation
Contact United AV Pro with the show-control requirements, software environment, computer and monitor plan, DMX and network needs, destination, and any case or accessory requirements. Ask the team to confirm the exact Command Wing, condition, connector and fader test information, included equipment, price, availability, shipping, and warranty or return terms before purchase.
You can contact United AV Pro or browse the lighting consoles category to compare other control options.







