d&b audiotechnik D40 Four-Channel DSP Amplifier

$3,895.50

Used d&b audiotechnik D40 DSP amplifier with 4 × 2,400/2,000 W at 4/8 ohms, Milan, and 4-channel processing. Confirm configuration.

Estimated shipping weight and dimensions allow for protective packing of one unit; actual packaging may vary.

6 in stock

Let’s talk about your setup.

Questions about this equipment or your delivery destination? Contact United AV Pro before ordering.

Ask on WhatsApp

Plan your purchase of d&b audiotechnik D40 Four-Channel DSP Amplifier

Review the product description for any condition details and confirm the exact item condition with United AV Pro. Additional accessories, such as compatible rigging hardware or a flight case, can be requested where needed; confirm compatibility and availability before ordering. This listing gives you a starting point for comparing d&b audiotechnik D40 Four-Channel DSP Amplifier with the rest of your system. The current page shows the live title, price, product category, SKU where available, and the seller’s stated availability information. For manufacturer context, browse the d&b audiotechnik catalogue. Before ordering, confirm the exact unit, quantity, included accessories, warranty terms, current availability, freight, and delivery timing for your transaction.

Listing details: Condition: confirm with United AV Pro; price shown above; SKU UAVP-CAT-5667; category ; Availability: In stock (6 units in the store record).

Specifications recorded on this listing

  • Brand: d&b audiotechnik

Questions to confirm before ordering

  • Is the exact model, revision, quantity, and condition shown on this page currently available?
  • Which accessories, cables, brackets, rigging hardware, covers, software, or other items are included, and can compatible rigging hardware or a flight case be requested?
  • What testing, service history, cosmetic wear, or inspection evidence applies to the offered item?
  • What amplifier, processor, connector, power, mounting, or compatibility requirements should be checked?
  • What are the applicable delivery, freight, warranty, cancellation, and return terms for the destination?

Continue your research

Use the professional audio buying guide to compare application, system fit, condition, transport, and total ownership questions. Review Shipping & Returns and the Refund & Returns Policy, then contact United AV Pro with your quantity, application, destination, deadline, and the details you need confirmed in writing.

Description

d&b audiotechnik D40 four-channel DSP amplifier combines four channels of Class D amplification, loudspeaker management, remote control, and Milan networking in a 2 RU mobile amplifier. This United AV Pro listing is for a used D40 described as being in mint or excellent condition with very low usage. The listing identifies eight units at the current per-unit price. It is an amplifier listing; loudspeakers, touring racks, cables, network bridges, and system accessories are not assumed to be included unless United AV Pro confirms them in writing.

The D40 is designed for professional d&b systems and should be matched to the connected cabinet family, processing version, mains supply, network design, and required output mode. The manufacturer specifications below describe the D40 platform. They do not replace an inspection of a used unit or certify the condition of every amplifier in the listed inventory.

What this D40 listing represents

  • Used d&b audiotechnik D40 four-channel DSP amplifier.
  • Mint or excellent condition with very low usage as stated in the United AV Pro listing.
  • Eight units listed, with the current price applying to one amplifier.
  • Four amplifier channels with a manufacturer reference of 4 × 2,400 W into 4 ohms and 4 × 2,000 W into 8 ohms.
  • 2 RU chassis with a 4.3-inch color TFT touchscreen.
  • Milan-enabled network audio and Ethernet-based d&b Remote control.

The quantity of eight is current store inventory, not a promise that all units share identical service history or firmware. Confirm the exact serial number, condition, included items, and availability of the particular unit before ordering. If several amplifiers are needed for a system, ask United AV Pro to confirm whether the units can be supplied as a matched group.

Four-channel Class D architecture

d&b describes the D40 as a mobile-specific four-channel amplifier that provides the power density needed for high-efficiency KSL, V-Series, Y-Series, and T-Series systems. Its signal processing, filtering, equalization, and delay functions are integrated into the amplifier rather than requiring an unrelated external loudspeaker processor for every application.

The official D40 page lists current d&b loudspeaker setups except GSL, SL-SUB, J-Series, and M2. This compatibility statement is important when comparing the D40 with an existing d&b inventory. Do not assume that a D40 is the correct amplifier for every d&b cabinet. Check the current d&b release notes, cabinet setup list, amplifier firmware, and the intended operating mode before connecting a loudspeaker.

Output power and system design

The D40’s published maximum output is 4 × 2,400 W into 4 ohms and 4 × 2,000 W into 8 ohms, with a stated maximum output voltage of 180 V peak and current of 35 A peak. These are platform reference values under specified test conditions. They do not describe a guaranteed acoustic level, and they should not be used as a substitute for the loudspeaker manufacturer’s presets, limiters, or system-design process.

A four-channel amplifier may drive four independent channels, a compatible two-way active configuration, or another supported d&b output arrangement. The correct channel count per cabinet depends on the model, cabling, impedance, processing, and desired system mode. Treat the output rating as an engineering reference and allow a qualified technician to confirm the wiring and protection settings.

DSP, filtering, delay, and LoadMatch

The D40 includes two 16-band equalizers with parametric, notch, shelving, and asymmetric options. Its published input and digital processing latency is 0.3 milliseconds, and the delay setting range is 0.3 milliseconds to 10 seconds. These tools can align loudspeakers and shape a system, but a delay value should be calculated from the actual geometry and measurement position rather than copied from a generic example.

d&b LoadMatch is intended to preserve tonal balance by compensating for the electrical properties of loudspeaker cable when supported cable lengths are used. The D40 page references cable lengths up to 70 metres or 230 feet for applicable loudspeakers. LoadMatch does not remove the need for correct cable gauge, connector condition, polarity, safe routing, and an approved d&b system setup.

The amplifier also provides d&b loudspeaker-specific circuits and a frequency generator with pink-noise and sine-wave options from 10 Hz to 20 kHz. These facilities are useful for commissioning and system checks, but they should be used by trained personnel with appropriate load and hearing-safety procedures.

Milan and remote control

The D40 is Milan-enabled and supports up to 16 input channels through eight Milan audio inputs, four analog inputs, and four AES3 channels. The built-in five-port AVB Ethernet switch supports 100/1000 Mbit network audio connections. Ethernet access to the d&b Remote network uses Open Control Architecture through AES70/OCA, and the amplifier can be controlled through its web interface or d&b R1 Remote software.

The presence of Milan capability does not mean that a network switch, computer, Milan controller, Dante bridge, software license, or cabling is included in this listing. Confirm the network topology, firmware, audio transport, and control requirements before planning a system. If the project uses AES3 rather than Milan, verify the required source, link, clocking, and cable arrangement.

Connections and front-panel controls

The official connector data identifies four analog input XLR females and four analog link XLR males, two AES3 input pairs, and a digital link output. Speaker outputs include NL4 connections and an NL8 option for supported configurations. The amplifier also provides two RJ45 Ethernet connectors and a powerCON TRUE1 TOP mains connector.

The 4.3-inch color touchscreen has a 480 × 272 pixel resolution. A digital rotary encoder and front-panel controls provide local access. On a used amplifier, check the touchscreen for dead areas, dim backlighting, inconsistent response, and startup errors. Inspect the XLR, AES3, NL4, NL8, RJ45, and mains connectors for damage, looseness, corrosion, or non-standard repairs.

Power, dimensions, and weight

d&b lists the D40 rated mains voltage as 100–127 V or 208–240 V at 50–60 Hz, with automatic mains range selection and active power-factor correction. The correct mains range and distribution must be confirmed for the destination and venue. A product page cannot certify that a particular used unit has the correct plug, cable, voltage configuration, or service history for every country.

The D40 measures 2 RU × 19 inches × 512 mm, or approximately 20.2 inches deep, and weighs 13.8 kg or 30.4 lb. Allow additional space for connectors, airflow, rack hardware, and safe service access. Confirm the rack depth, rail strength, shockmount requirements, and vehicle handling plan before placing several amplifiers into a touring package.

System integration and compatibility

The D40 may suit a professional rental inventory, touring production, venue, installation contractor, or system integrator using compatible d&b loudspeakers. Its Milan connectivity is relevant to networks that need audio transport and control over structured cabling, while its analog and AES3 inputs support more traditional signal paths.

Before matching the D40 to a loudspeaker, confirm the exact model, the current d&b amplifier setup, the firmware release, the required output mode, the cable length, and the number of cabinets per channel. The D40 cannot by itself turn an unapproved combination into a supported system. If the project involves GSL, SL-SUB, J-Series, M2, or another excluded setup, request a specific manufacturer-compatible amplifier recommendation.

Used-equipment inspection

The listing describes the D40 units as mint or excellent with very low usage, but condition should be confirmed for the specific unit. Ask for the serial or model label, front and rear photographs, recent power-on testing, firmware information, error history if available, and any service or repair records. Confirm whether the supplied unit includes a power cable, rack ears, mounting hardware, or other accessories. Do not assume items shown in a product photograph are included unless the listing or quotation says so.

A qualified technician should inspect the mains input, protective earth, fans, display, encoder, meters, input and output connectors, network ports, thermal behavior, and amplifier status. Test with a safe known load and the intended d&b setup. Do not connect a loudspeaker or cable simply because the physical connector fits; confirm pinout, mode, impedance, and processing first.

Price and availability

United AV Pro lists the D40 at USD $3,895.50 per amplifier and shows eight units in stock. These commercial facts belong to the current listing and are separate from the manufacturer data. Confirm the per-unit price, current quantity, exact condition, delivery destination, and the items included in the quotation before ordering.

For a delivery quotation, provide the destination country, city, and postal code. Confirm whether packing, freight, lift access, rack handling, insurance, and any required customs documentation are part of the delivery arrangement. Review the United AV Pro shipping and returns page for the store’s published process, and ask the team to confirm any warranty or return terms that apply to this used amplifier.

Verified manufacturer reference

The technical points in this description were checked against d&b audiotechnik’s official D40 amplifier page. The verified reference covers the four-channel Class D design, 4 × 2,400/2,000 W at 4/8 ohms, 180 V peak and 35 A peak reference, 4.3-inch touchscreen, Milan audio, up to 16 input channels, analog and AES3 inputs, LoadMatch, 2 RU × 19 inches × 512 mm dimensions, 13.8 kg weight, and the published mains range. See the official d&b D40 amplifier page and current manufacturer downloads for manuals and release notes.

Request a quotation

Contact United AV Pro with the loudspeaker models, channel count, input format, Milan or AES3 requirements, destination, and quantity required. Ask the team to confirm the exact used-unit condition, included equipment, firmware, availability, per-unit price, warranty or return terms, and packing arrangements before placing an order.

You can contact United AV Pro or browse the amplifiers category to compare other professional system options.

Additional information

Weight 36 lbs
Dimensions 26 × 25 × 9 in
Brand

Let’s find your next piece of gear.

Have a question about equipment, your setup, or an international enquiry?

Contact United AV Pro